Corra's Raceway
By Corrie van Tonder
**32 Images - Please allow time to load**
Here's my 2-lane Ninco layout. Set up is on a 2.5 meter x4 meter table space with a nice balance of straight-a ways
and turns for both speed and yet still be challenging. Powered with a 0-30 volts 10 amps power supply. Also using the
one wall as n nice pits area. I added 30 lamp posts, each equipped with a 5 volts LED, al the buildings are lightened
inside and outside with LED'S, also the grandstand and the track are lightened with yellow, green and red LED'S powered
by a 12 volts 2 amps AC power supply, 5 flood lights and also a pits 8 spotlight so I can organize night races. In total
are there 180 lights working on the track.
I'm really proud of my 6 doors garage, made of wood and all the scenery on the track; I had here and there some
New Ray and Carrera stuff that I've used. All other buildings are handmade by me using correy flex (getting the ideas
from scaley and scx). The bridge is made of polystyrene, the tables and chairs are made of balsa wood. ALL the racing
stickers and logos I surfed from a lot off nice web sides and was then resized and printed on Laser Copier Inkjet covered
with Dc fix. Most of the figurines were hand painted by me.
Regards Corrie van Tonder
|